Wired IR Cable - suits  REBL-X  and  PS₃IR-500/1000.
Use to hard-wire the IR connection.

This is a standard 1.2M black molded cable with 3.5mm stereo male-male plugs.
It connects between the IR output of your automation/control system and the Wired IR input of a PS₃IR-1000,  PS₃IR-500 or REBL-X.

Note:
Make sure that the signal level of your Control system IR output is compatible with the PS₃IR controller your using.
Schmartz specify 3V-12V signal input for the PS₃IR-1000, and does not guaranty the operation of the PS₃IR-1000 wired IR port with a low level (single emitter level) source. Custom installations using Double IR diodes have shown reliable operation since signal voltage will be around 3V- 5V peak. REBL-X specifies 2V-12V.

Test Rig: PS₃IR-1000, driven by an RTI ECB-5, with double emitter diodes connected.